Fike Sita Multipoint Detector Addressable Rafiki 205-0003 Smoke

This is the Fike 205 0003 Twinflex Multipoint ASD Detector, Rafiki 205-0003 with No sounder.

Note: this item is non-returnable; we are not able to take it back as “unwanted”. Please make sure that this is the exact item you require before ordering.

Fike Sita Multipoint Detector 205 0003 – Specs

• Built in short circuit isolator.
• These options are set by PC.
• The optical chamber is monitored for contamination which is then indicated by the LED.
• Supplied complete with dust cover.
• Requires: Mounting base (See Acessories 903-0001)
• Loading: ALU = 0, max 175 ALU per zone.
• ASD = Addressable Intelligent Multipoint Detector.
• Multifunction smoke and heat detector.
• Complies with EN54 part 2, EN54 part 4, EU Directives and BS5839 Part 1: 2002.
• 15 combinations of smoke & heat detection modes.
• Automatic continuous self calibration.
• Auxiliary digital inputs and outputs are available at any addressable multipoint device.
• Detector is monitored for all failures of sensor chamber – warning is indicated when a smoke detector head requires servicing.
• Fast short circuit isolator in every device
• 15 combinations of smoke & heat detection modes
• Multi stage alarms – pre alarm feature
• 7 sound patterns – plus off, 3 different volume settings if using Sita Multipoint with integral sounder
• Auxiliary digital inputs and outputs are available at any Addressable Multipoint device
• Automatic continuous self calibration
• Addressable Multipoint detector is monitored for all failures of sensor chamber – warning is indicated when a smoke detector head requires servicing
• Maintenance is made easy with the unique disposable optical chamber,designed as a cost effective solution to cleaning and re-calibration
• All modes are compliant with European detector type specifications, and are suitable for use in installations compliant with

Technical Specs

• Manufacturer: Fike, model: Sita 205 0003 (Rafiki)
• Compatibility: Sita 200 plus
• Operating Temperature: -10degs to 50degs Celsius
• Voltage range: 16 to 48V DC;
• Operating current:
  # Quiescent: 78microA;
  # MP alarm: 2.2microA;
  # Sound High: 7.5microA;
  # Sound Med: 4.1microA;
  # Sound Low: 1.2microA;
• Loading:
  # MP: 0 ALU;
  # sounder low: 0.5 ALU;
  # sounder med: 1 ALU;
  # Sounder Hi: 2 ALU;
• Sound outputs: low 75dB(A), mid 85dB(A), high 92dB(A);
• Sound tones: 0, 1, 2, 3, 4, 5, 6 + 7;
• LED operation: quiescent 20s interval, alarm 0.3s interval;
• Dimensions: 105mm diameter, 62mm width;

Modes of detection

• SMOKE 1: Highly thermally enhanced optical Used where ionisation detectors are normally fitted,especially when there are high ceilings or a risk of free burning fires
• SMOKE 2: Thermally enhanced optical Used where optical detectors are normally fitted,when there is a risk of a smouldering fire and for escape routes.
• SMOKE 3: Thermally enhanced optical with pulse rejection Used where optical detectors are normally used in positions exposed to brief concentrations of water vapour or smoke e.g. from a bathroom, kettle etc.
• HEAT 1: Rate of rise to 58C Used where a standard rate of rise detector would normally be used
• HEAT 2: Low fixed temperature 58C Used where a standard fixed temperature heat detector would normally be fitted, suitable for kitchens etc
• HEAT 3: High fixed temperature 90C Used where a high fixed temperature heat detector would normally be fitted, suitable for boiler rooms etc.
• Modes of detection: Combinations: Any combination of smoke and heat modes may be selected, and differing alarm responses selected for each mode. If the Multipoint with integral sounder is required,then it too can be set to a choice of 7 different sound patterns 67mm 107mm max 75mm

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer’s change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• 2050003-1.pdf
  (279.65 kB)