6 Way Ryefield Board taking 100A Fuse Units, Ryefield TP6AHS100

This is the Ryefield Engineering TP6AHS100 6 Way Ryefield Board taking 100A Fuse Units, TPN 6 Way Ryefield Distribution Board.

Ryefield is pre-approved by DNO LV boards to distribute power in HMOs.

Note: This Ryefield Board is subject to a max. 2 weeks Returns policy as “unwanted” – we can take it for a refund of its value only within 14 calendar days period from its receipt. Please make sure this is the Ryefield Board you require before purchasing.

These boards are proven as the most cost-effective solution. Used in conjunction with metering equipment, since they distribute the power from the main cut-out to the dwelling meters.

Please note: the carriage charge for this Ryefield board is 35 + VAT (which will automatically be added at Checkout) due to the size and weight of the board.

Ryelfield TPN Fuseboard. This is a 6-way Ryefield board taking 100A fuses (included).

This TPN Ryefield board is ideal for providing separate circuit protection for each dwelling in a multiple-dwelling setting or HMO.

You can use it for up to 6 x 3 single phase (up to 6 flats), using 100A fuses.

The Ryefield distribution boards are some of the most popular LV distribution fuseboards in the UK market, since they offer a robust electrical wiring solution especially for a multi-dwelling residential setting.

6 Way Ryefield Board TP6AHS100 taking 100A Fuses – Features

• Materials: the boards are made of 18g steel sheets with the case back drilled and embossed for wall fixing.
• Retro-fit Surge Ready for 18th Edition Compliance.
• Lift off the hinged cover with padlocking attachment and Multilock.
• Standard main incoming clamps are adjustable to accept 25 mm2 to 120 mm2 stranded conductors.
• Provide separate circuit protection for each dwelling (circuit).
• The back of the case was drilled and embossed for wall fixing.
• Standard main brass clamps: adjustable
• Finish: Case powder coated Dark Grey Shade BS381C 632 Full Gloss, Internal parts galvanised steel, fixings zinc plated.
• Standard main brass clamp and pinching screw circuit terminals – one per fuse unit.
• Brass earth block with pinching screw terminals and PME link.
• The neutral clamp with pinching screw circuit terminals: one per fuse unit.
• Standard busbar: current rating of max. 400A.
• Plain removable plates on the top and bottom are standard.
• 6-way Ryefield board complete with 6 x 100A fuses
• Model: Ryefield Engineering TP6AHS100 Three Phase Distribution Board taking 6x 100A Fuse Units (included)
• Installation: it is recommended to use registered electricians to install this Ryefield board.

Note: the Ryefield TPN pattern fuse boards range from 6 to 48 fuse ways spread over three phases as standard, specials on request. Email us for quotes.

TP6AHS100 6 Way Ryefield Distribution Board 100A – Specifications

• 100 amp service type fuse units.
• L1/L2/L3 in a 2/2/2 combination.
• Rated fused short circuit current 50kA at 415V.
• Maximum rating of busbars 400amp (as standard).
• Horizontal arrangement
• Maximum cable size 125mm
• Dielectric Test = 2.5kV for 1 minute.
• Dimensions: 535mm height, 400mm width, 180mm depth.
• Finish: Case enamelled epoxy-polyester powder dark grey shade. Steel screws and component parts zinc plated

Note: Picture is informative. At Sparks you can get some of the most affordable Ryefield Boards – cheaper than anywhere else! Order this Ryefield board online now!

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer’s change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• RY6100 TP6AHS100 datasheet.pdf
  (126.25 kB)