The CP Electronics KH2 time lag switch is an quick and effective way to ensure maximum energy-efficiency for lighting applications.
Note: this 2-wire (no neutral) touch activated time lag switch is not suitable for switching contactors, SON lighting, LED lighting, or heating or ventilation loads.
Pressing the touchpad turns on the light, which will then turn off automatically after a preset time period has elapsed (the time period can be adjusted from 20 seconds to 20 minutes).
The KH2 electronic time lag switch touch activated boasts a robust timer with tamper resistant touch pad operation. It is easy to operate and has an adjustable timing period.
These units do not require a neutral connection, therefore they can be used to replace an existing light switch. The duration of the time delay is set by a thumbwheel on the reverse of the unit.
KH2 Touch Activated Time Lag Switch – Features
- Robust timer with tamper resistant touch pad operation
- Easy to operate, with a fully adjustable timing period
- You can adjust the time delay settings via pots.
- It is a 2 wire no-neutral switch, suitable for lighting. 2-wire time lag switch – no neutral.
- It comes with a 5 year manufacturer’s warranty.
- Electronic time lag switch touch activated
CP Electronics KH2 Time Lag Switch Touch Activated – Technical Specs
- Load: 10A of lighting including incandescent, fluorescent, compact fluorescent, low voltage (switch primary of transformer).
- Time Delay: approx 10sec – 20mins
- Part of the CP Electronics Green-i range
- Fluorescent and compact fluorescent fittings with switch start ballasts – 10 ballasts maximum. Power factor correction capacitors must be fitted.
- LED lamps: this time lag switch is NOT suitable for LEDs.
- This product requires a minimum load of 60W; it may not be suitable for use with low power lighting such as LED lights.
- Load rating at 230V AC: 10A for incandescent, fluorescent, and compact fluorescent loads.
- Supply voltage: 220-240 Volts AC 50 Hz
- Dimensions: 86mm width, 86mm length, 17mm depth, 19mm projection from wall
- Timeout period: 20 seconds to 20 minutes (approximate)
- Fixing method: Surface fixing 25mm deep plastic surface mount moulded box.
- Flush fixing: 25mm steel wall box or 32mm deep cavity wall box.
- Terminal capacity: 1.5mm2
- Material: Flame retardant ABS
- Rating: Class 2
- Temperature: -10C to 35C
- Conformity: EMC-2004/108/EC, LVD-2006/95/EC, CE Mark
- Not suitable for switching contactors, SON lighting, and heating or ventilation loads. Not suitable for LED lighting.
| Switches & Sockets Specific | |
| Back Box Depth | 25mm |
| Brand | CP Electronics |
| Finish | White |
| Gang | 1 |
| Insert | No Insert |
| Plate | Plastic |
| Plate Dimensions | 86mm x 86mm |
| Style | Moulded White |
| Type | Time Delay Switch |
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer’s change. Should you require the exact item in the picture, please call or email us to enquire.
Need more detailed specs?
-
KH2-data.pdf
(946.4 kB)
Related products
-
Alarm Systems, Energy Saving Devices
Original price was: $120.11.$60.06Current price is: $60.06. Add to cart
Reviews
There are no reviews yet.